Skip to content

Production test system for FMCW RF proximity sensors

RF Proximity Sensor Test System

Verifies the range performance and functions of FMCW RF proximity sensors in minutes after series production, in a shielded anechoic cabinet.

Benchtop anechoic test cabinet with an integrated echo simulator that verifies range and function of FMCW RF proximity sensors in X and Ku band after series production.

  • Defence and security

Overview

An anechoic cabinet and an echo simulator in one test station

The RF proximity sensor test system checks FMCW RF proximity sensors operating in different frequency bands after series production, with range to target as the primary measurement. It combines two integrated units. The anechoic test cabinet shields the sensor from outside interference and absorbs reflections, so that the sensor under test sees only the simulated target; it sits on a desk or on a wheeled stand. The echo simulator receives the sensor's transmission through horn antennas inside the cabinet and returns a target signal with the range delay and reflected power defined by the operator, in real time. Test parameters are entered on a laptop connected to the simulator over Ethernet, and a control interface is provided for automatic production testing.

Key capabilities

  • Real-time range simulation

    01

    The echo simulator returns the sensor's signal with the delay of a target from 2 m to 20 m at 0.5 m resolution or better, and with the calculated reflected power. Output level runs from 0 to −50 dBm, and an attenuation stage matches the input to the incoming signal.

  • FMCW sensor signals in X and Ku band

    02

    The simulator works from 6 to 18 GHz with 500 MHz instantaneous bandwidth. It handles sawtooth up, sawtooth down, triangular up/down and triangular down/up FMCW signals with sweeps up to 500 MHz and chirp periods from 1 µs.

  • Shielded anechoic cabinet

    03

    An aluminium cabinet of at most 150 × 100 × 100 cm with RF/EMI gaskets gives at least 70 dB shielding from 6 to 10 GHz and 60 dB from 10 to 18 GHz. Polypropylene pyramid absorbers with −40 dB reflectivity line the inside. The cabinet accepts sensors transmitting up to 40 dBm (10 W).

  • Built for series production

    04

    An IP65-sealed, EMI-shielded door and side access panels with D-sub and 18 GHz SMA feedthroughs give quick access to the sensor. Interchangeable holders and adapters fit different sensor models, and the control interface connects the station to automatic production test software.

Applications

Defence and security

  • End-of-line verification of RF proximity sensors in series production
  • Range and functional checks of FMCW sensors in X and Ku band

Specifications

Simulator frequency range
6 GHz – 18 GHz (X and Ku band)
Simulated range
2 m – 20 m
Range resolution
≤ 0.5 m
Instantaneous bandwidth
500 MHz
FMCW sweep
Up to 500 MHz, chirp period ≥ 1 µs
Simulator output level
0 dBm to −50 dBm
Operational input level
−35 dBm to 0 dBm
Cabinet shielding
≥ 70 dB (6–10 GHz), ≥ 60 dB (10–18 GHz)
Absorber reflectivity
−40 dB (6–18 GHz)
Maximum sensor output power
40 dBm (10 W)
Horn antennas
2 × 6–18 GHz, ≥ 9 dBi, linear polarisation
Cabinet outer dimensions
≤ 150 × 100 × 100 cm

Detailed specifications and export information are available on request.