Skip to content

Electronic warfare simulator

SPEDIS-TX

Generates a controlled radar signal environment of up to 64 simultaneous emitters for passive radar and ELINT system testing, from 0.5 to 18 GHz.

Radar emitter simulator that generates up to 64 simultaneous emitters from 0.5 to 18 GHz to test and verify passive radar and ELINT systems.

  • Defence and security

Overview

A controlled radar spectrum for the system under test

SPEDIS-TX is a family of electronic warfare simulators. It generates a controllable RF environment for passive radar and ELINT systems, so that the receiver is tested against a realistic, repeatable spectrum before it goes to the field. Up to 64 emitters are simulated at the same time, each with its own carrier frequency, pulse width and pulse repetition interval agility, intra-pulse modulation, antenna pattern and antenna scan. SPEDIS-TX covers 0.5 to 18 GHz with 1 GHz instantaneous bandwidth and works in both direct injection and radiation modes. The portable version is for range testing and workbench use; versions for anechoic chamber, tower and other test site installations are also available.

Key capabilities

  • Up to 64 simultaneous emitters

    01

    Each emitter in the scenario is defined independently, so the device under test receives a dense spectrum of overlapping radar signals rather than a single test tone.

  • PRI, pulse width and carrier agility

    02

    Pulse repetition interval, pulse width and carrier frequency follow constant, jitter, stagger, dwell and switch, wobbulation or burst profiles to reproduce real radar modes. Pulse width runs from 50 ns to 100 ms and PRI from 1 µs to 1 s.

  • Intra-pulse modulation

    03

    Frank, Zadoff, P and Barker codes, BPSK and QPSK with custom variants, custom phase patterns, and frequency and amplitude modulation.

  • Antenna pattern and scan

    04

    Uniform, CosX, fixed, pencil, cosecant and custom antenna patterns, combined with circular, conical, bidirectional and unidirectional raster, sector, helical, spiral and random scans (random from 100 µs).

  • Noise jammer

    05

    Barrage noise at 50, 100 or 200 MHz bandwidth and spot noise at 1, 2, 5, 10 or 20 MHz bandwidth.

  • Portable and fixed installations

    06

    The portable unit with integrated screen and keyboard serves workbench and range testing. Advanced versions are installed in anechoic chambers, on towers and at other test sites, in direct injection or radiation mode.

Applications

Defence and security

  • Performance verification of passive radar and ELINT systems
  • Workbench and range testing of passive radar and ELINT receivers
  • Anechoic chamber and tower test installations

Specifications

Frequency band
0.5 GHz – 18 GHz
Instantaneous bandwidth
1 GHz
Simultaneous emitters
Up to 64
Pulse width
50 ns – 100 ms
PRI
1 µs – 1 s
Dynamic range
80 dB block (40 dB instantaneous)
Noise jammer
Barrage (50/100/200 MHz), spot (1/2/5/10/20 MHz)
Operating modes
Direct injection and radiation
Warranty
2 years

Detailed specifications and export information are available on request.